TYR ENVIRO-TECH

10 Years Manufacturing Experience

What should I do if the motor overheats when using the scrubber?

When the scrubber starts working, clean water or cleaning fluid will automatically flow to the brush plate. The rotating brush plate quickly separates the dirt from the ground. The suction scraper at the back thoroughly sucks and scrapes the sewage, so that the ground is spotless and dripping. It can be said that the cleaning value of the scrubber lies in the ability to completely remove the dirt in a short time, and make the ground dry immediately, almost 100% of the dirt is washed and sucked into the machine to take away from the scene, it can guarantee less Play a big role while using water and cleaning fluid.

The efficiency of the scrubber is doubled compared to manual cleaning. Generally speaking, according to the cleaning width of the scrubber multiplied by the speed of the scrubber, the cleaning area per hour of the scrubber can be obtained. There are two types of scrubbers: push-type and driving type. If it is a push-type scrubber, it is calculated according to the speed of manual walking (about 3-4km per hour). A push-type scrubber per hour It can clean the ground about 2000 square meters, and the driving type scrubber has an efficiency of 5000-7000 square meters per hour depending on the model. Generally, the higher the degree of automation, the higher the cleaning efficiency.

Everyone knows that manual cleaning is not only very hard, but often the cleaning effect is not very good, and the use of scrubbers has led the cleaning industry to develop in a smart, fast, and labor-saving manner. In addition, the cleaning value of the floor scrubber is also reflected in its cleaning method and cleaning efficiency. The floor scrubber is a special equipment specially designed for hard floor cleaning. They have many specifications and models, which are especially suitable for large areas. Cleaning operation. The floor scrubber is generally composed of a clean water tank, a recovery tank, a scrubbing brush, a water suction motor, and a water suction scraper. The clean water tank is used to store clean water or add cleaning liquid clean water. The recovery tank is to suck up and store the sewage from washing the floor.


Post time: Dec-27-2021

Send your message to us:

Write your message here and send it to us